Free USA Shipping orders $150+

BLK Friday! Free GLA Nectar AIO & Terra Root Caps USA orders $150+

In Stock
GLA

GLA PRO-CO2 Atomizing Reactor 5L - Nature Aquarium CO2 Reactor

74 reviews Write a Review
$199.95
GLA PRO-CO2 Atomizing Reactor 5L - Nature Aquarium CO2 Reactor
GLA PRO-CO2 Atomizing Reactor 5L - Nature Aquarium CO2 Reactor
GLA PRO-CO2 Atomizing Reactor 5L - Nature Aquarium CO2 Reactor
GLA PRO-CO2 Atomizing Reactor 5L - Nature Aquarium CO2 Reactor
GLA PRO-CO2 Atomizing Reactor 5L - Nature Aquarium CO2 Reactor
GLA PRO-CO2 Atomizing Reactor 5L - Nature Aquarium CO2 Reactor
GLA PRO-CO2 Atomizing Reactor 5L - Nature Aquarium CO2 Reactor
GLA PRO-CO2 Atomizing Reactor 5L - Nature Aquarium CO2 Reactor
→ Catalog #
GLA-CO2-ATOMIZING-REACTOR
→
Free USA Shipping
Current Stock:

SHIPS SAME OR NEXT BUSINESS DAY!

Complete Your Setup:

GLA PRO-CO2 Atomizing Reactor 5L - Nature Aquarium CO2 Reactor
Inc. Sales Tax
Ex. Sales Tax

Description

GLA PRO-CO2 Atomizing Reactor 5L

The GLA PRO-CO2 Atomizing Reactor 5L combines ultra-fine ceramic CO2 atomization with a large external dissolution chamber to improve CO2 utilization and reduce gas accumulation in planted aquarium systems.

Unlike conventional reactors that primarily rely on waterflow and contact time to dissolve larger gas bubbles, the PRO-CO2 Reactor first atomizes CO2 into a fine mist. The reactor chamber then provides additional contact time for dissolution before water returns to the aquarium.

The result is efficient CO2 delivery with reduced visible microbubbles, less gas pocketing, and no in-tank diffuser required.

At a Glance

  • Reactor Design: 5-liter hybrid ceramic atomizing reactor
  • Installation: External filter return line
  • Typical Working Pressure: Approximately 20–25 PSI
  • Recommended Waterflow: Minimum approximately 300 GPH; typical operating range 400–1200 GPH+
  • Included Adapters: 12mm, 16mm, 20mm, and 1"
  • Dimensions: Approximately 20" tall × 6" diameter
  • Construction: Clear acrylic chamber with enlarged internal flow path
  • CO2 Connection: Push-connect fitting
  • Maintenance: Removable, replaceable ceramic atomizer
  • Power: No separate electrical connection required for the reactor

Best For

  • Planted aquariums using compatible external filtration or return pumps
  • Aquarists seeking efficient CO2 dissolution with less visible mist inside the aquarium
  • Medium to large planted aquariums and higher-demand CO2 installations with adequate filtration flow
  • Aquarium installations where an in-tank diffuser is not preferred
  • High-flow filtration systems requiring flexible tubing adapters and a serviceable reactor design

The reactor's suitability depends primarily on available waterflow, plumbing compatibility, and CO2 demand rather than aquarium size alone.

Beyond Conventional CO2 Reactors

Innovative Engineering. Exceptional CO2 Dissolution.

The GLA PRO-CO2 Atomizing Reactor 5L represents a different approach to aquarium CO2 delivery. Rather than simply introducing gas into a chamber and relying on waterflow to dissolve it, GLA combines two complementary technologies: ultra-fine ceramic atomization and high-capacity reactor dissolution. The result is a sophisticated hybrid system engineered to make more effective use of every bubble of CO2.

What makes this reactor different is how its components work together. A precision ceramic atomizer breaks CO2 into an exceptionally fine mist before it enters the spacious 5-liter dissolution chamber. This dramatically increases the surface area available for gas exchange, helping CO2 dissolve efficiently while reducing the gas accumulation, visible microbubbles, and wasted injection associated with less efficient systems.

Innovation extends beyond the atomizer. An enlarged internal flow path supports powerful filtration systems, while the removable ceramic assembly, replaceable components, and versatile connection options make the reactor practical to maintain and adaptable to different installations. Every major feature has a purpose: better CO2 utilization, efficient water movement, straightforward servicing, and dependable long-term operation.

For aquarists who invest in quality lighting, filtration, and fertilization, CO2 delivery deserves the same attention. The PRO-CO2 Atomizing Reactor is more than an alternative to a conventional diffuser or reactor. It's an investment in a thoughtfully engineered CO2 delivery system designed to bring greater efficiency, refinement, and control to the planted aquarium.


Filter Compatibility & Installation

The GLA PRO-CO2 Reactor installs externally on the return line of a compatible canister filter or dedicated circulation system. It must receive adequate waterflow to operate effectively.

Correct Installation: Canister Filter → PRO-CO2 Reactor → Aquarium Return

Important: Install the reactor on the filter return line only. Do not install it on the filter intake line.

The included 12mm, 16mm, 20mm, and 1" adapter sets accommodate a variety of filtration connections, including many Fluval FX Series installations when the appropriate fittings are used.

Confirm your actual tubing and connection dimensions before installation. Each adapter must be fitted with its matching silicone O-ring to provide a proper water-tight seal.

Allow sufficient cabinet space for the reactor's height, plumbing, and maintenance access.

Initial Setup & Priming

Proper installation and priming are important for removing trapped air and establishing normal water circulation through the reactor. The chamber must be completely filled with water before CO2 injection begins.

  1. Select the Correct Adapters: Choose the included adapter size appropriate for your filtration system. Confirm that the matching clear silicone O-rings are properly seated beneath the adapters.
  2. Install the Reactor: With filtration turned off, connect the reactor to the filter return line. Connect the filter outflow to the reactor water inlet and the reactor outlet to the aquarium return line.
  3. Connect the CO2 Supply: Insert CO2-resistant tubing fully into the push-connect fitting on top of the reactor. Install a compatible check valve between the regulator and reactor. Keep CO2 injection turned off during priming.
  4. Prepare for Priming: With filtration still off, loosen one reactor lid screw approximately one to two turns. Do not remove the screw. Place a towel beneath the reactor to collect water released during priming.
  5. Fill and Vent the Reactor: Start the filtration system and allow the chamber to fill with water. Trapped air will escape through the loosened screw location.
  6. Complete Priming: Continue until water begins to flow from the loosened screw location. Allow a small amount of water to overflow to help remove remaining air, then hand-tighten the screw. Keep escaping water away from electrical equipment.
  7. Inspect for Leaks: Check the reactor lid, adapters, tubing connections, and fittings. Confirm the chamber is filled and all connections are secure before beginning CO2 injection.
  8. Begin CO2 Injection: Set the regulator to the appropriate working pressure, typically 20–25 PSI for GLA PRO-CO2 reactors. Begin with a conservative CO2 flow rate and make gradual adjustments according to aquarium conditions.

Important: Reactor lid screws are designed for hand tightening only. Never use screwdrivers, drills, pliers, power tools, or excessive force. Overtightening can damage the screws, threads, O-rings, or acrylic components.

Lid Screw Precaution: The reactor lid screws are designed for hand tightening only. Do not use screwdrivers, drills, pliers, or excessive force. Overtightening can damage the screws, threads, seals, or acrylic components.

Working Pressure, Waterflow & CO2 Adjustment

GLA PRO-CO2 reactors, including standard and atomizing configurations, typically operate at approximately 20–25 PSI. Actual settings may vary according to the installation and operating conditions.

The reactor has a recommended minimum waterflow of approximately 300 GPH, with a typical operating range of 400–1200 GPH or greater. Actual waterflow through a filter can be lower than its advertised pump rating due to tubing, filter media, plumbing, and installation resistance.

Working pressure and CO2 injection rate are separate adjustments. Set sufficient working pressure for atomizer operation, then use the regulator's precision needle valve to control the amount of CO2 being injected.

When switching from another diffuser or reactor, begin with a conservative bubble rate. More efficient dissolution can change the amount of CO2 available to the aquarium even when the bubble count remains the same.

Make gradual adjustments while monitoring your drop checker, aquarium circulation, and livestock. A drop checker responds with a delay and should not be treated as a real-time safety indicator.

For more information, see our CO2 Working Pressure & Flow Guide.

Cleaning & Maintenance

The removable ceramic atomizer allows routine cleaning and replacement without requiring a new reactor assembly.

Over time, algae, biofilm, or mineral deposits may restrict the ceramic membrane and reduce fine-bubble production. Clean the atomizer using methods appropriate for its materials and follow the supplied maintenance instructions.

During maintenance, also inspect:

  • Ceramic atomizer condition
  • Internal standpipe and flow passages
  • Lid seal and adapter O-rings
  • Tubing connections and fittings
  • Acrylic chamber and lid for damage

Always stop CO2 injection, isolate the water circulation, and relieve any remaining pressure before opening or servicing the reactor.

After reassembly, restore waterflow, prime the reactor as needed, and inspect all connections for leaks before resuming normal operation.


Specifications

  • Model: GLA PRO-CO2 Atomizing Reactor 5L
  • Reactor Chamber Capacity: 5 Liters
  • Construction: Acrylic
  • Height: Approximately 20"
  • Diameter: Approximately 6"
  • Diffusion Technology: Removable ceramic atomizer with external dissolution chamber
  • Working Pressure: Typically 20–25 PSI
  • Minimum Recommended Waterflow: Approximately 300 GPH
  • Typical Operating Flow: 400–1200 GPH+
  • Installation: External filter return line
  • CO2 Connection: Push-connect fitting
  • Included Adapter Sizes: 12mm, 16mm, 20mm, and 1"
  • Additional Power: Not required when operated using an existing compatible filtration system

What's Included

  • GLA PRO-CO2 Atomizing Reactor 5L
  • Installed removable ceramic atomizer
  • 12mm adapter set
  • 16mm adapter set
  • 20mm adapter set
  • 1" adapter set
  • Matching clear silicone O-rings
  • Installation and maintenance guide

Required Separately: A compatible pressurized CO2 system, CO2-resistant tubing, and an external filter or circulation pump capable of providing sufficient waterflow. A compatible CO2 check valve is recommended and sold separately.


Frequently Asked Questions

How does this reactor differ from a conventional CO2 reactor? The PRO-CO2 Atomizing Reactor uses a ceramic membrane to create fine CO2 bubbles before they enter the dissolution chamber. This increases gas-to-water contact and helps improve dissolution compared with conventional large-bubble reactor designs.

Will I still need an in-tank CO2 diffuser? No. The reactor introduces CO2 externally through the filter return line, so a separate in-tank diffuser is not required.

Will I see CO2 bubbles in the aquarium? The reactor is designed to reduce undissolved CO2 and visible mist. Some microbubbles may still be present depending on waterflow, CO2 injection rate, and system configuration.

Does the reactor eliminate gas accumulation? The hybrid atomizing design helps reduce gas pocketing, but small amounts of gas may still accumulate under certain operating conditions. Persistent gas pockets may indicate insufficient waterflow, excessive CO2 injection, or trapped air requiring attention.

Is the reactor compatible with Fluval FX Series filters? The included 1" adapter set supports many Fluval FX Series installations. Confirm the specific filter's tubing and connection dimensions before ordering.

Can I clean or replace the ceramic atomizer? Yes. The atomizer is removable for cleaning, inspection, and replacement. The entire reactor does not need to be replaced for routine atomizer servicing.

Does the reactor require an additional pump? Not when your existing compatible filtration system provides adequate waterflow. The reactor does not contain a motor or require its own electrical connection.

Is a CO2 check valve included? No. A compatible check valve is recommended to help prevent water backflow toward the CO2 regulator and is sold separately.

Pre-Sales & Shipping Information

GLA CO2 reactors are non-returnable. For questions about filter compatibility, tubing adapters, installation, or reactor operation, please contact GLA before purchasing.

Customer Reviews

74 reviews

  • 5

    Co2 reactor

    Posted by Eddie on 7th Jul 2025

    This was the very best CO2 management tool ever created for the planted tank hobby. It dissolves the CO2 with such precision and purity that it would be hard to imagine there being anything else out there that can beat it. I’ve never minded diffusers or the bubbles but the CO2 fluctuated. This unit even after the CO2 regulator shuts down is still holding and dissolving CO2 through the night. Just gradually keeping the aquarium stable. Whom ever designed it “ Nailed it “!!!!!!!

  • 5

    This co2 reactor works!

    Posted by Kyle Rifkin on 1st Jul 2025

    Have had this hooked up to my Fluval FX for about a week. It took my a few days to get my co2 levels dialed because I was moving slow, but man does this work extremely well. Plants are super pearly by mid day. Zero complaints!

  • 5

    GLA products

    Posted by Eddie on 16th Jun 2025

    There many companies out there to chose from but not like GLA. I purchased everything for my planted tank from them and the quality is spot on. The support team is super cool and stay with you till they know your set. Thanks GLA.

  • 5

    They should call this the co2 blaster 1000

    Posted by Jacob Smith on 9th Jun 2025

    This thing works! It’s a true beast of a co2 reactor and works flawlessly. Pro tip: This isn’t a diffuser and works on different principals so if you’ve never used one have GLA free tech support help you adjust your system. GLA was absolutely stellar with customer support. They helped me tune my aquascape gas exchange and now my plants are growing before my eyes, literally! The pearling I get now is just unreal and a sight to see. This co2 reactor is worth every penny.

  • 5

    My diffusion is at level 1000 now!

    Posted by Kenneth Alvarez on 2nd Jun 2025

    Took a few days to get completely dialed in, but holy crap pearling plants! Using an in-tank diffuser prior I got minimal pearling. But now, some of my plants started floating to the top they were so bubbly! Never in my life would I have ever considered a reactor until seeing one of these at my LFS. I’ll never go back to an in-tank diffuser this thing is incredible.

  • 5

    An absolute unit.

    Posted by Blake Jameson on 31st May 2025

    Wasn’t really sure how big it was going to be. It’s huge lol. But not only that it’s extremely well made, very high quality and works exactly as it should. Really cool, came with 3 sets of hose connections and even scroll of Teflon tape and some gaskets. 10 out of 10 from me!

  • 5

    This reactor is super nice.

    Posted by Felix Hernandez on 23rd May 2025

    Wasn't expecting this when I opened the box. Very nice size and quality craftsmanship. For my 90g its working flawlessly. If you are looking for a profesional grade co2 reactor, this is it.

  • 5

    Works perfect!

    Posted by Jessica Odell on 20th May 2025

    My first reactor and I’m beyond pleased. I was over the 7-Up look from my regular diffuser and since using this reactor the active pearling is intense. Plants are responding and I’m sure my fish are loving the extra oxygen produced by the plants. Very high quality co2 reactor!

  • 5

    I found the solution to my co2 levels in this co2 reactor.

    Posted by Eric Fitzgerald on 11th May 2025

    Almost gave up on my 120g scape due to so many issues keeping my co2 levels stable. I will say GLA helped a ton with my tank. I was doing so many things wrong I had no idea. By implementing this reactor and GLA’s guidance my plants are busting with oxygen before lights out. Amazing product and customer support you’d expect to pay for, I certainly should have paid them for all the help. Thank you GLA.

  • 5

    Where has this been all my life!

    Posted by Niles Comey on 10th May 2025

    My plants are pearling like crazy since I started using this reactor. Needless to say this bad boy works!

  • 5

    This is one heck of a co2 reactor.

    Posted by Glen Humphrey on 4th May 2025

    I saw the dimensions in the listing, but it doesn’t do it justice. The bad boy is nice and big. I have this on a 160g tank and it’s working superbly. It did take me a couple days to adjust things, to be expected. Super happy, very well made reactor from GLA.

  • 5

    Works like a charm and total clarity.

    Posted by Clide Morganson on 3rd May 2025

    Works flawlessly. My tank is finally crystal clear and no issue with fizzy looking water. However I will say be sure ot use a check valve on your co2 tubing as this does not come with one. Also, cool side effect happens is your plants will start to produce millions of oxygen bubbles. My old diffuser was able to do this at a fraction of the level. Now the amount of oxygen production is super intense and quite beautiful. My fish eat the pure oxygen bubbles for dinner lol. Anyways, great products from GLA Im super happy.

  • 5

    They should call this the SUPER co2 reactor.

    Posted by Hector Delgado on 2nd May 2025

    The pictures do not do justice, this thing is a big and burly. I can not stress enough how intense my plants produce oxygen by the end of the day, its super intense and no diffuser ever did that for me. Super impressed with this, and thank you David for helping tune my co2 levels!

  • 5

    Huge thanks to GLA and team!

    Posted by Lewis Gates on 28th Apr 2025

    Highly recommend GLA products. Got a whole co2 system and this reactor and could not be happier. Everything was high quality and packaged well. Service was top notch!

  • 5

    This bad boy is the jam!

    Posted by David Harris Jr on 25th Apr 2025

    This is THE co2 reactor. 3 weeks solid so far and haven’t touched a dang thing. My apex controller says my co2 has never been more stable. Love this thing!

  • 5

    Brilliant co2 reactor and great customer support!

    Posted by Laney Duval on 25th Apr 2025

    Wonderful experience was had working with GLA and my first co2 reactor. I come from years of old diffusers and inline diffusers but grew tired of the frothy bubbles all over. It wasn’t bad but once you see a clear tank enriched with co2 it’s hard to pass up the concept. My local fish shop has GLA products and they had one of these hooked up on a big display tank. I ordered one with a new co2 system and in 5 days it arrived and was set up. I did have GLA assist me with tuning the co2 bubble rate and in 48hrs my drop checker was a lime yellowish green and was advised to lower my bubble rate. Day 3 it was perfect. Everything has been sparkling clear and my plants are loving it! A million thanks David at GLA for all your help!

  • 5

    GLA has the best co2 equipment no exception here.

    Posted by Flynn Durham on 23rd Apr 2025

    I have the first gen version of this reactor in steel and very pleased with it. I waited a while for my second tank to get all the bits in line and this was the final piece. After two days of dialing in my co2 this thing is incredible. My water is crystal clear and plants are pearling like mad. I get more pearling plants with this reactor than I did with my inline diffuser. Solid build quality typical of GLA.

  • 5

    Loving this reactor so far.

    Posted by Aquariums by Design Miami on 22nd Apr 2025

    Ditched my inline diffuser for this and the results are incredible. My atomizer never made my plants pearl nearly as much. Didn’t take long to get dialed in thanks to the support from GLA. Their tech support is amazing and very helpful. If you buy this and never used a co2 reactor before, reach out to these guys and save yourself the time of knowing how to properly use a reactor. You won’t regret it.

  • 5

    This is what a co2 reactor should be.

    Posted by Rick Mcully on 21st Apr 2025

    Retired my previous reactor to give this a whirl and man is it a beast. I have it hooked up to my Eheim Pro 3E and it’s a beast. My co2 is totally saturated and by late noon my plants are pearling like crazy. This thing is awesome!

  • 5

    What an absolute beast of a co2 reactor wow!

    Posted by Ahmed Rashid Mohamed on 19th Apr 2025

    I was pleasantly surprised when I opened the box. This is larger than my co2 system. This is an absolute unit! I use Eheim 2262 to power this monster. I spent 3 days fine tuning the reactor which prepare yourself it will take a few days. GLA sided me in getting me dialed in and I learned so much. There expertise and vast knowledge paid off. David was all hands on deck getting my 150g tank dialed in to perfection. I have 100% saturation, no huge gas bubble in the reactor. Drop checker almost a lime green at 2.5 bubbles per second, possibly 2 per second. 3 days of tuning and I’m on day 9 and haven’t touched anything in my co2 system. I find myself tending to the plants more than anything and no more diffuser cleanings. Happy camper here!

Join the List

Premium CO2 equipment, high-purity fertilizers & personal support

24. Shipping Truck

Fast, Reliable Worldwide Shipping

Same or next business day processing

50. accepted Deliver

Free USA Shipping $150+