Description
GLA PRO-CO2 Atomizing Reactor 5L
The GLA PRO-CO2 Atomizing Reactor 5L combines ultra-fine ceramic CO2 atomization with a large external dissolution chamber to improve CO2 utilization and reduce gas accumulation in planted aquarium systems.
Unlike conventional reactors that primarily rely on waterflow and contact time to dissolve larger gas bubbles, the PRO-CO2 Reactor first atomizes CO2 into a fine mist. The reactor chamber then provides additional contact time for dissolution before water returns to the aquarium.
The result is efficient CO2 delivery with reduced visible microbubbles, less gas pocketing, and no in-tank diffuser required.
At a Glance
- Reactor Design: 5-liter hybrid ceramic atomizing reactor
- Installation: External filter return line
- Typical Working Pressure: Approximately 20–25 PSI
- Recommended Waterflow: Minimum approximately 300 GPH; typical operating range 400–1200 GPH+
- Included Adapters: 12mm, 16mm, 20mm, and 1"
- Dimensions: Approximately 20" tall × 6" diameter
- Construction: Clear acrylic chamber with enlarged internal flow path
- CO2 Connection: Push-connect fitting
- Maintenance: Removable, replaceable ceramic atomizer
- Power: No separate electrical connection required for the reactor
Best For
- Planted aquariums using compatible external filtration or return pumps
- Aquarists seeking efficient CO2 dissolution with less visible mist inside the aquarium
- Medium to large planted aquariums and higher-demand CO2 installations with adequate filtration flow
- Aquarium installations where an in-tank diffuser is not preferred
- High-flow filtration systems requiring flexible tubing adapters and a serviceable reactor design
The reactor's suitability depends primarily on available waterflow, plumbing compatibility, and CO2 demand rather than aquarium size alone.
Beyond Conventional CO2 Reactors
Innovative Engineering. Exceptional CO2 Dissolution.
The GLA PRO-CO2 Atomizing Reactor 5L represents a different approach to aquarium CO2 delivery. Rather than simply introducing gas into a chamber and relying on waterflow to dissolve it, GLA combines two complementary technologies: ultra-fine ceramic atomization and high-capacity reactor dissolution. The result is a sophisticated hybrid system engineered to make more effective use of every bubble of CO2.
What makes this reactor different is how its components work together. A precision ceramic atomizer breaks CO2 into an exceptionally fine mist before it enters the spacious 5-liter dissolution chamber. This dramatically increases the surface area available for gas exchange, helping CO2 dissolve efficiently while reducing the gas accumulation, visible microbubbles, and wasted injection associated with less efficient systems.
Innovation extends beyond the atomizer. An enlarged internal flow path supports powerful filtration systems, while the removable ceramic assembly, replaceable components, and versatile connection options make the reactor practical to maintain and adaptable to different installations. Every major feature has a purpose: better CO2 utilization, efficient water movement, straightforward servicing, and dependable long-term operation.
For aquarists who invest in quality lighting, filtration, and fertilization, CO2 delivery deserves the same attention. The PRO-CO2 Atomizing Reactor is more than an alternative to a conventional diffuser or reactor. It's an investment in a thoughtfully engineered CO2 delivery system designed to bring greater efficiency, refinement, and control to the planted aquarium.
Filter Compatibility & Installation
The GLA PRO-CO2 Reactor installs externally on the return line of a compatible canister filter or dedicated circulation system. It must receive adequate waterflow to operate effectively.
Correct Installation: Canister Filter → PRO-CO2 Reactor → Aquarium Return
Important: Install the reactor on the filter return line only. Do not install it on the filter intake line.
The included 12mm, 16mm, 20mm, and 1" adapter sets accommodate a variety of filtration connections, including many Fluval FX Series installations when the appropriate fittings are used.
Confirm your actual tubing and connection dimensions before installation. Each adapter must be fitted with its matching silicone O-ring to provide a proper water-tight seal.
Allow sufficient cabinet space for the reactor's height, plumbing, and maintenance access.
Initial Setup & Priming
Proper installation and priming are important for removing trapped air and establishing normal water circulation through the reactor. The chamber must be completely filled with water before CO2 injection begins.
- Select the Correct Adapters: Choose the included adapter size appropriate for your filtration system. Confirm that the matching clear silicone O-rings are properly seated beneath the adapters.
- Install the Reactor: With filtration turned off, connect the reactor to the filter return line. Connect the filter outflow to the reactor water inlet and the reactor outlet to the aquarium return line.
- Connect the CO2 Supply: Insert CO2-resistant tubing fully into the push-connect fitting on top of the reactor. Install a compatible check valve between the regulator and reactor. Keep CO2 injection turned off during priming.
- Prepare for Priming: With filtration still off, loosen one reactor lid screw approximately one to two turns. Do not remove the screw. Place a towel beneath the reactor to collect water released during priming.
- Fill and Vent the Reactor: Start the filtration system and allow the chamber to fill with water. Trapped air will escape through the loosened screw location.
- Complete Priming: Continue until water begins to flow from the loosened screw location. Allow a small amount of water to overflow to help remove remaining air, then hand-tighten the screw. Keep escaping water away from electrical equipment.
- Inspect for Leaks: Check the reactor lid, adapters, tubing connections, and fittings. Confirm the chamber is filled and all connections are secure before beginning CO2 injection.
- Begin CO2 Injection: Set the regulator to the appropriate working pressure, typically 20–25 PSI for GLA PRO-CO2 reactors. Begin with a conservative CO2 flow rate and make gradual adjustments according to aquarium conditions.
Important: Reactor lid screws are designed for hand tightening only. Never use screwdrivers, drills, pliers, power tools, or excessive force. Overtightening can damage the screws, threads, O-rings, or acrylic components.
Lid Screw Precaution: The reactor lid screws are designed for hand tightening only. Do not use screwdrivers, drills, pliers, or excessive force. Overtightening can damage the screws, threads, seals, or acrylic components.
Working Pressure, Waterflow & CO2 Adjustment
GLA PRO-CO2 reactors, including standard and atomizing configurations, typically operate at approximately 20–25 PSI. Actual settings may vary according to the installation and operating conditions.
The reactor has a recommended minimum waterflow of approximately 300 GPH, with a typical operating range of 400–1200 GPH or greater. Actual waterflow through a filter can be lower than its advertised pump rating due to tubing, filter media, plumbing, and installation resistance.
Working pressure and CO2 injection rate are separate adjustments. Set sufficient working pressure for atomizer operation, then use the regulator's precision needle valve to control the amount of CO2 being injected.
When switching from another diffuser or reactor, begin with a conservative bubble rate. More efficient dissolution can change the amount of CO2 available to the aquarium even when the bubble count remains the same.
Make gradual adjustments while monitoring your drop checker, aquarium circulation, and livestock. A drop checker responds with a delay and should not be treated as a real-time safety indicator.
For more information, see our CO2 Working Pressure & Flow Guide.
Cleaning & Maintenance
The removable ceramic atomizer allows routine cleaning and replacement without requiring a new reactor assembly.
Over time, algae, biofilm, or mineral deposits may restrict the ceramic membrane and reduce fine-bubble production. Clean the atomizer using methods appropriate for its materials and follow the supplied maintenance instructions.
During maintenance, also inspect:
- Ceramic atomizer condition
- Internal standpipe and flow passages
- Lid seal and adapter O-rings
- Tubing connections and fittings
- Acrylic chamber and lid for damage
Always stop CO2 injection, isolate the water circulation, and relieve any remaining pressure before opening or servicing the reactor.
After reassembly, restore waterflow, prime the reactor as needed, and inspect all connections for leaks before resuming normal operation.
Specifications
- Model: GLA PRO-CO2 Atomizing Reactor 5L
- Reactor Chamber Capacity: 5 Liters
- Construction: Acrylic
- Height: Approximately 20"
- Diameter: Approximately 6"
- Diffusion Technology: Removable ceramic atomizer with external dissolution chamber
- Working Pressure: Typically 20–25 PSI
- Minimum Recommended Waterflow: Approximately 300 GPH
- Typical Operating Flow: 400–1200 GPH+
- Installation: External filter return line
- CO2 Connection: Push-connect fitting
- Included Adapter Sizes: 12mm, 16mm, 20mm, and 1"
- Additional Power: Not required when operated using an existing compatible filtration system
What's Included
- GLA PRO-CO2 Atomizing Reactor 5L
- Installed removable ceramic atomizer
- 12mm adapter set
- 16mm adapter set
- 20mm adapter set
- 1" adapter set
- Matching clear silicone O-rings
- Installation and maintenance guide
Required Separately: A compatible pressurized CO2 system, CO2-resistant tubing, and an external filter or circulation pump capable of providing sufficient waterflow. A compatible CO2 check valve is recommended and sold separately.
Frequently Asked Questions
How does this reactor differ from a conventional CO2 reactor? The PRO-CO2 Atomizing Reactor uses a ceramic membrane to create fine CO2 bubbles before they enter the dissolution chamber. This increases gas-to-water contact and helps improve dissolution compared with conventional large-bubble reactor designs.
Will I still need an in-tank CO2 diffuser? No. The reactor introduces CO2 externally through the filter return line, so a separate in-tank diffuser is not required.
Will I see CO2 bubbles in the aquarium? The reactor is designed to reduce undissolved CO2 and visible mist. Some microbubbles may still be present depending on waterflow, CO2 injection rate, and system configuration.
Does the reactor eliminate gas accumulation? The hybrid atomizing design helps reduce gas pocketing, but small amounts of gas may still accumulate under certain operating conditions. Persistent gas pockets may indicate insufficient waterflow, excessive CO2 injection, or trapped air requiring attention.
Is the reactor compatible with Fluval FX Series filters? The included 1" adapter set supports many Fluval FX Series installations. Confirm the specific filter's tubing and connection dimensions before ordering.
Can I clean or replace the ceramic atomizer? Yes. The atomizer is removable for cleaning, inspection, and replacement. The entire reactor does not need to be replaced for routine atomizer servicing.
Does the reactor require an additional pump? Not when your existing compatible filtration system provides adequate waterflow. The reactor does not contain a motor or require its own electrical connection.
Is a CO2 check valve included? No. A compatible check valve is recommended to help prevent water backflow toward the CO2 regulator and is sold separately.
Pre-Sales & Shipping Information
GLA CO2 reactors are non-returnable. For questions about filter compatibility, tubing adapters, installation, or reactor operation, please contact GLA before purchasing.
Customer Reviews
-
Beast mode has been activated!
The photo does no justice with this reactor. It’s massive and works perfectly! Co2 levels are stable and stay steady everyday. I have my co2 on a ph controller so my levels are dialed into perfection. High quality unit that freaking works! A++
-
This thing rocks!
This is what I’ve wanted since ditching my Cerges reactor. That thing was a nightmare and an absolute abortion of a design. With this it’s just super easy to use and I don’t ever mess with it. My co2 is stable and always puts my drop checker near the yellow zone in short time.
-
GLA the best in co2 equipment.
I use GLA equipment for years and never a problem. GLA customer support always very kind and supportive anytime I have a question on anything. Really love their text-message support system which was just incredible at my success with my aquascape. This will be my 2nd time entering IAPLC contest and already feeling positive. Love this reactor.
-
Absolutely love it ?!
Best co2 reactor for planted tanks. Many trials and errors for me and co2 reactors until now. I have 3 reactors now in a junk pile after constant adjusting I just could not manage. This reactor took me 2.5 days to get dialed in, and it’s perfect now. This reactor is big time volume which I really like and it’s likely the culprit of the success with its huge volume, but I don’t know. It’s built extremely well of high quality material and I have no doubt this will be my favorite method of diffusion.
-
❤️Absolutely love this co2 reactor.
Coming from a smaller competing brand this thing blows every other reactor away in construction and overall performance. Zero co2 escapes this thing unlike the other brand I invested in. Whats even better is its quality, it’s built better from top to bottom and much larger in volume, in fact it’s huge and bigger than my co2 system. Tank drops a full 1.5ph in short time and pearls like crazy before my lights are out. GLA always brings top quality planted aquarium products.
-
Beast of a co2 reactor, I mean it’s huge.
I come from a long history of using co2 reactors. My first one was from GLA about 16 years ago when they made large PVC reactors. I actually still have it in service today. Years later I adopted an Aquariumplants.com reactor which is basically a Cerges reactor. That was close to a nightmare to get dialed in and hated that stupid internal pump they implemented. I then purchased the plastic reactor GLA use to have listed on their site but appears to be no longer available. I actually like that one a lot except it’s to small in volume. Fast forward to now I have this giant reactor. It’s absolutely perfect. It’s build extremely well and the volume it has is exactly what I prefer. It handles a big co2 flow rate and no co2 is able to escape. It’s bigger than my actual co2 system, it’s that big. Always loved GLA products because they bring quality stuff that delivers. Customer service is second to none.
-
Changed my Dutch scape into an absolute garden.
This co2 reactor completely changed my plant beds. I’ve struggled for months trying to get stable co2 in this tank. It’s a 75g with a 30g sump so I was always making adjustments and almost gave up. I’ve had this installed now for 3 weeks and it’s been such a blessing. I'm more hands off now and spend more time now figuring out my fert dosage. Trimming,dosing and maintenance are all I do, I no longer mess with my co2 system. Plants look fantastic and I’m now making a little money back selling my plant clippings on Facebook and forum pages.
-
This is a quality built co2 reactor I’ve been looking for.
I bought two of these for my two aquascapes. One uses an Eheim 2262 and the other uses an Eheim Pro. I like that this reactor comes with several sets of hose connectors. I didn’t have to glue any adapters or make any modifications. Everything came ready out of the box including a whole roll of Teflon tape. The volume of this reactor is massive, much larger than competing brands so it’s able to hold up well for my 220g tank using the big Eheim 2262. After about 3 days of adjusting my co2 bubble rate I have a nice 1.3 ph drop in short time. Nice and gradual and not stupid fast where it can stress my fish. On my 120g tank with the Eheim Pro I get the same exact outcome. Except this tank is half the volume so I use much less co2. I’ve used a competing brand of GLA’s reactor that was smaller and wasted co2, co2 was actually escaping the reactor. To me that’s a failed design. No co2 should ever escape a co2 reactor. If it does , you clearly have a failed design. With this large format reactor from GLA NOT A SINGLE BUBBLE ESCAPES. Because of this I rated it 5 stars ⭐️ because it’s a quality built unit and does what it’s supposed to do without wasting a single bubble of co2. Thank you GLA staff for helping me and bringing us a great product.
-
GLA PRO-CO2 Reactor 5L
GREAT QUALITY REACTOR,NO NOISE,NO LEAK,DISSOLVES 100% OF CO2,VERY HAPPY.
-
Totally transformed my tank.
Not new to reactors but new to GLA’s co2 reactor. This is an absolute beast and does the job very well. I trim stem plants every few days now and have been replanting like crazy. Totally worth the investment.
-
My first time with a co2 reactor and absolutely love ❤️ it!
I’ve only used co2 diffusers the last 2-3 years and while they’ve been great I never was a huge fan of all the billions of micro bubbles. I took the plunge this month on this reactor and it’s been just wonderful. My co2 levels are perfect and keeps my drop checker in the yellow zone lol, yeah I know but my fish don’t mind and my plants have never pearled as much as they do now. Great product and even better customer service, they are just so kind. :)
-
This is the co2 reactor.
I’ve tried a few co2 reactors and this thing blows them away. It’s huge, let’s say that first. Second, zero co2 escapes this reactor so every bubble you inject gets saturated. If you’re new to using a co2 reactor know there’s a 2-4 day tune in time. It takes you a few days to get your co2 levels perfect. And when you do they are absolutely perfect. I built a raspberry pi pH controller to monitor my GLA CO2 System and my data log reports are rock steady for my co2. I love this thing it’s been an absolute dreamy unit.
-
This co2 reactor is a game changer for my tank.
I wasn’t sure how this would turn out after using regular inline diffusers but man is this thing awesome. Water is crystal clear and at the end of the day the amount of pearling is crazy! Took me a few days of dialing in as I suspected and I definitely won’t be going back to traditional diffusers ever. Just bought a second one for my new scape underway. Thank you GLA customer service you guys are amazing!
-
Best purchase for my 150g tank was a GLA ful co2 system and reactor.
Pumped on this co2 reactor. Saturates every bubble I inject and my co2 levels are rock steady. Took a few days for me to dial in but man it’s awesome. Plants pearl like crazy now. Looking forward to adding one to my 80g tank next week.
-
I’ll never use any other method of diffusion.
Fantastic co2 reactor, if you want clear water without all the fizzy co2 loon this is it! I absolutely love it, but it doesn’t come with a check valve so make sure you get one. Other than that my 150g is loving this paired with an Aquelle filter.
-
Best of the best!
I’ll be buying another one next week. Excellent quality and man this thing produces results. Intense pearling in my old tank like never before and definitely putting this in my office tank as well.
-
Love it!
Very happy with this giant co2 reactor. Quality material and craftsmanship and it works just like it should. Tank is a 150g abd pearling nicely!
-
This is much better than a diffuser.
I’ve been very pleased with this reactor. There is a lot to learn when using a reactor. Without the educational support of GLA I would not have known I was doing everything wrong, or mostly wrong. This has my co2 levels extremely stable now that I’m properly set up. My plants now pearl like crazy and trimming is now the focus of attention on my aquascapes. I came today to buy another one for another aquascape using a regular diffuser. The folks at GLA are extremely nice and helpful beyond measure. They treat you like a family member which is rare this day and age. Shout out to Brian for all the help you offered me along my journey.
-
Big boy co2 reactor!
Even though I measured I was impressed when it arrived. The volume is nice and big. It has no issue handling my 160g tank with high levels of co2. Took me approximately 3 days to dial in with a ph controller and is now fully automated. Apex controller shows co2 levels are super stable 24/7. Worth every penny and really good quality craftsmanship.
-
This is an absolute unit!
Much bigger than anticipated. Hooked up to a Fluval FX using tubing adapters on the inside of the fluval tubing and hose clamps. Works fantastic! Took me two days to get my drop checker into the yellow with about a 1.5 drop in ph. Super pumped on this reactor, especially the lack of visible co2 bubbles.
