Featuring the world's finest and highest CO2 diffusion rate, our Atomic CO2 diffuser creates supreme diffusion of CO2 in aquarium water. CO2 is capable of 100% dissolution in the aquarium water.
Creates a super fine mist of CO2 bubbles, bubble size is less than 0.1mm diameter
Includes suction cups
COLOR OF THE DIFFUSER CERAMIC MAY VARY. CERAMIC COLOR MAY VARY FROM THE PHOTOGRAPH AND MAY APPEAR BROWN/GRAY/OR WHITE.
This professional quality diffuser requires a minimum of 30 psi working pressure.
Must be used with Green Leaf Aquariums CO2 resistant pressure rated tubing only, not for use with silicone, soft or other brand tubing. Tubing must be acid resistant and rated for high working pressure. Compatible with CO2 resistant tubing sold by GLA.
Handle diffuser carefully, do not touch ceramic. Install and remove tubing carefully.
Do not use with bubble counter fluid or other bubble counter oils. Fill bubble counter with water only to avoid contamination of diffuser.
Monitor and clean diffuser regularly. Clean in-tank type diffusers approximately every 2-3 weeks.
Clean atomic diffuser carefully with mixture of 3 parts water to 1 part bleach. Never rub ceramic.
It is recommended to keep 2 diffusers and rotate diffusers between cleanings.
Shipping, Warranty & Returns
Atomic diffusers are not warranted against improper use or handling. Please read all important notices listed above prior to purchase and prior to use.
This diffuser puts out a very fine mist. It dissolves well and I can run at a lower bubble count which is great for conserving CO2. I'd definitely recommend it over the glass ones. I'm using a 50 mm on a 10 gallon tank.
I just switched all my glass diffusers in my tanks to GLA original Atomic co2 diffusers. There is no other diffuser I have used that creates such a fine co2 mist. I guess this is why you need to make sure your co2 regulator can handle higher working pressure. I find running a range from 30-45psi works best in my setups.Love these diffusers!